Device table and map view

In this guide you will learn how to use the device table and map view in Leanheat Monitor.

Device map 

To bring up the device map view navigate to the "Devices" tab. Upon clicking it you will be presented with a map, displaying devices with an assigned location.

If you would like to see additional information  about a specific device, you can click on it. A pop-up will appear, showing the device name, it's location, alarms (if active) and selected sensor values.

You can choose the sensor values by selecting them from the menu on the right hand side of the screen. 

Once you select the values click the

• "Save" button if you want to save this preset as the existing one
• "Save as" button if you want to create a new preset

Providing you want to create a new preset, you will be prompted with a pop-up banner, where you enter the name of the new preset.

You can switch between presets on the top of the screen (located beneath device filters).

Device table view

In the upper right corner of the device map view, you can see a button labeled "Devices in table". This gives you a table view of all the devices. 

You can choose the sensor values by selecting them from the menu on the right hand side of the screen. 

Once you select the values click the

• "Save" button if you want to save this preset as the existing one
• "Save as" button if you want to create a new preset

Just like when using device map view, you can switch between saved presets by click on their respective banners above the table. 

We also offer the option to export this table as a .csv file. It can be done via the "export .csv" button on the top left of the table.

The table is displaying the latest readout of the sensor, if you would like to see the latest readout (current) click on "refresh table".

For more details, please check the video below: