Connect ECL 296/310

In this guide you will learn how to connect an ECL 296/310 in Leanheat Monitor.

To connect an ECL  296/310 firstly make sure that the endpoint url in the ECL is "LCL.portal.danfoss.com" and that the "ECL Portal" setting is turned "on". These settings can be found on the ECL directly or by using the ECL tool. If navigating directly on the ECL the settings are found under "system" - "Portal config".

By clicking on the "Portal info" on the ECL you will me presented with the serial number and the access code which are needed to connect the ECL to Leanheat Monitor.

Inside of Leanheat Monitor navigate to the "Admin" tab, click "Connect" which is in the upper left corner and select "connect ECL" from the list. Input the serial number and access code which  you got from your device and click "connect".

The device is instantly visible in Leanheat Monitor but the live data might take up to 10 minutes before it is visible.

For more details, please check the video below: